Installing wallpaper at home is not an easy decision for some people. There are many things to consider, such as the durability of the wallpaper, its type, maintenance, and the most important is how to install wallpaper. If we compare it to wall paint, wallpaper is more interesting because we can choose more motifs and colors. In terms of price, it is not much different from wall paint, but the impression shown will be better than just using paint which tends to be monotonous.
People who have money, usually immediately call a professional wallpaper installer service. But if not, you need tips and a complete guide on to how install wallpaper easily. For that, read the complete guide to installing wallpaper for your home below.
1. Know the Type of Wallpaper You Install
Based on the surface, we distinguish wallpaper into two types, namely paper and vinyl. To differentiate between the two, paper-type wallpaper has a less shiny surface, while vinyl looks more shiny. Because they are made of paper, paper-type wallpaper tears easily compared to the sturdier vinyl. Cleaning paper-type wallpaper is more difficult because we can only clean it with a dry cloth. For vinyl wallpaper, we can use a wet cloth. The advantage of paper-type wallpaper is that it can be recycled and easy to remove, while vinyl cannot be recycled, so it is not environmentally friendly. You should also know about other types of wallpaper to better understand its advantages and disadvantages.
2. Stains and Uneven Surfaces Will be Annoying
Wall preparation is a must. Before installing wallpaper, make sure your walls are clean from stains and uneven surfaces. This process is important so you can paste the wallpaper perfectly. If your wall is damp and peeling, peel off the paint and patch it with putty. If there are holes in the wall because of nails, fill in the holes using wall putty so that your wallpaper is affixed evenly. In addition, you have to make sure the walls are clean from thick, fine dust and not wet. This needs to be done so that there are no air bubbles during installation.
3. Measure the Height and Width of The Wall
Make sure you have a tape measure to measure the length and width of the wall where the wallpaper will be installed. Then, mark the length and width that you measured on the wallpaper. Next, overlay the wallpaper and then measure it to the size you got before.
You can mark the measurement results on the wallpaper with a pencil. Leave a few centimeters so that if the wallpaper accidentally tears, you don’t have to worry about patching. Then draw a straight line from the top to the bottom of the wall with a thin pencil. This line will serve as a guide when installing the wallpaper. Don’t rely on door lines or ceilings, because your wallpaper won’t stick as neatly.
4. Start Applying The Glue
After the measurement is complete, you can apply wallpaper glue evenly. Use a non-stick brush to apply glue. If the bristles fall off, it will leave the bristles and cause an uneven wall surface.
Just apply wallpaper glue once to the entire surface, don’t overdo it because it causes the wallpaper to shrink. But if it’s too little, the wallpaper won’t stick.
5. Install The Wallpaper Slowly
You’ve applied the glue. Next is installing the wallpaper. Stick the wallpaper slowly and make sure you cover the wall with wallpaper neatly without crossing the lines you have marked with a pencil. For perfect results, add a little glue at the end of the wallpaper to make it stickier.
If it’s successful, now you have to make sure the wallpaper sticks perfectly to the wall surface. Use a rag and start smoothing it in a circular motion like wiping a wall. This is important so that there are no air bubbles on your wallpaper.
After reading this guide, I hope you’re sure you want to install your wallpaper by yourself. But if you’re still unsure, you can use a very professional wallpaper installation service from Honpo. If you are sure, make sure you have the equipment to install which you can buy at Honpo.
