Gravure printing -Printing this way is very consistent and can provide uniform colors and copies throughout the printing process even if the process consists of several million copies and doesn't have many variables to control. Thus a simpler process ensures consistent print quality throughout the process and fewer errors in printing.
Adhesive - PVA reinforced starch adhesive, suitable for non-woven wallpaper. The adhesive must be applied to the wall or behind the wallpaper in a uniform layer. 4-5 m2/liter is recommended for sufficient adhesion. If pasting the wall - let the adhesive dry on the wall for a while.
Hanging -Cut to hang end-to-end. Smooth the length with a short nap smoothing brush or soft plastic. Be careful when removing the air bag. Remove residual adhesive with a clean damp sponge and lukewarm water, before drying.
Fire Class -Non-woven of our wallpaper is Fire Reterdant ( EN 13501-1:2007).
Light Fastness - Good light fastness, Production site is one of the newest in Europe (2010) and certified by ISO 14001.
Opacity -Very high (>98% Light backgrounds may require uniform substrate).
Washability -washing power is far above average with other products on the market.